Yes the Scarlett Solo can do the job. Connect the microphone to the computer through the USB cable supplied with the microphone. Plug the small end of the cable into the microphone. Plug the. If you already know what kind of microphone you need, then read more about the best condenser mics and the best dynamic mics.
That makes sense. How to connect a microphone to a PC Computer or laptop and start Also, it is not possible to directly connect a condenser microphone to a. In order for the condenser diaphragm to be charged and operate, it must be connected to an external device to provide the necessary power.
Step 2 Buy and install a sound card that can has the ability to connect a quarter-inch jacks. This is my first time trying to record using a condenser mic and I have spent days trying to figure this problem out) I am trying to connect an. MysterySlender Commendable.
Put on the headphones and make some noise to test the volume level. Condenser microphones are widely used for professional recording, radio broadcasts and some live music applications. Also called "electret. OK, must be for a different model Xenyx.
BM condenser microphone won't work whenever I plug it in 3. Condenser microphones require power in order to operate. Connect the microphone to the input of phantom power box. Connect the output. When you read up on jacks make sure you understand the basic types - which are pretty well 2 circuit tip and sleeve and 3 circuit tip, ring and sleeve.
If you are using a computer audio interface, many of these units double as a preamplifier and phantom power source for condenser microphones, and are connected to the computer with a USB or Firewire cable from the interface's output. So I have a condenser (Alctron-MC) and a mixer (Behringer a new mixer with P48 or a P48 injector to hook up to your existing mixer. Items you will need Microphone Audio mixer Sound card.
Sennheiser on their radio mic packs use different combinations to set mic or line level - depending on the wiring. Homemade MIC Amplifier Loudspeaker connection circuit. You can connect condenser MIC with any amplifier circuit as given below diagram. That could be your problem right there.
Thanks guys for the info.
Reply to this topic
Most phantom boxes have capacitors between the input and output to prevent the DC going to the mic going back the other way, but I suspect the real issue os that you are having to unbalance the balanced output of the phantom power supply to feed the input with your XLR to 3. Looking for a usb sound card and phantom power supply the BM condenser microphone is most compatible with Started by honey.